Three roll rolling plate

We are a professional manufacturer of three roll rolling plate with over 10 years of industry experience. Today, we would like to introduce to you:
When the three roll rolling plate fails to rotate,it may involve multiple faults.Here are some common handling methods for your reference:

Firstly,we need to check if the power supply is functioning properly.Ensure that the power socket connected to the three roll rolling plate is energized and the plug is not loose.If the power supply is normal,the fault may lie in the motor.

Secondly,check whether the motor is affected by damage or overload.We can check if the fuses around the motor are blown,and if they are,they need to be replaced.At the same time,it is necessary to confirm whether the motor has any abnormal sound or odor.If these abnormal situations are found,it is recommended to immediately shut down the machine and have professional technicians perform repairs.

In addition,it is necessary to check whether the transmission part of the three roll rolling plate is operating normally.Whether the drive belt or gear is damaged or loose should be adjusted or replaced in a timely manner.Also,check the lubrication part to ensure that the lubricating oil is sufficient and of good quality.
Afterwards,if the problem remains unresolved after the above steps are checked,it may be a control system malfunction.You can check if the switches on the control panel are functioning properly and if the circuit is in good contact.If there is a problem with the control system,you can contact the manufacturer or professional maintenance personnel for repair.
In short,when the three roll rolling plate does not rotate,we should investigate the possible causes of the malfunction one by one.Check the power supply,motor,transmission parts,and control system in sequence,and take corresponding measures according to the situation to ensure that the three roll rolling plate can work normally.
Obtain detailed machine parameters and quotation.