6x2000 semi-automatic hollow rolling machine

一、 Symmetrical up regulation three roll plate rolling machine

This machine belongs to a three roll symmetrical plate rolling machine, used to roll steel plates into cylindrical, curved, and conical shapes.
The upper roller is manually pressed down by the lead screw, causing the sheet metal to bend and deform.

二、 Main parameters

三、 The design and acceptance standards for the symmetrical upward adjustment three roll plate rolling machine shall comply with the enterprise standards.

四、 Main body

The main structure of the equipment is composed of an upper roller device, a pressing device, a lower roller device, a main transmission device, and a base.

1. Upper roller device and pressing device

The upper roller device consists of an upper roller, an upper roller bearing seat, etc. Install sliding bearings on the bearing seats at both ends of the upper roller. The lifting of the upper roller is manually driven by the screw and nut. The pressing device is manually powered by humans and transmits torque through the screw nut to move the upper roller up and down.

2. Lower roller device

The lower roller device consists of the lower roller, lower roller bearing seat, driving gear, etc. The lower roller is the driving roller, which transmits torque to the lower roller through the motor, reducer, and gear.

3. Main transmission device

The main transmission device consists of a motor, a gear reducer, etc.

4. Left and right side racks and bases

The left and right frames and bases are made of steel plate welded parts, which are subjected to aging treatment after welding.

The equipment is made of steel plate welded parts, with high mechanical strength, high accuracy, and strong practicality. The adjustment and operation of parallelism between the upper and lower rollers are simple, and the equipment maintenance is convenient.

五、 Main purchased standard parts

1. Rolling bearings Harbin

2. Motor national standard

六、 Supply content

Equipment complete machine, equipment user manual, certificate of conformity

七、 Quality assurance

The warranty period for the entire equipment is one year. If the motor or reducer malfunctions within the year, the manufacturer shall replace it unconditionally. If the equipment malfunctions, the faulty part shall be determined by phone contact.

If you need a plate rolling machine or are interested in a plate rolling machine, please provide the material of the plate, plate thickness (maximum thickness, minimum thickness), plate width (roll length), and minimum coil diameter. We will recommend a suitable plate rolling machine for you.